Sound Card Replacement Tutor
I will help you access and replace the existing sound card in your desktop computer. We will accomplish this task in 5 short steps beginning from step 1.Navigate the application by saying "Next" "Previous" "Repeat" or "Exit".

Step 1: Open Computer Case
Open the cover of the computer following the manufacturer's
instructions. A sample is shown in the picture below

Step 2: Locate Sound Card
Look at the back of the computer where all the cords get plugged in.
Locate the panel where your speakers or head phones plug in
This panel is on the sound card that we will be removing

Step 3: Remove and Replace
With case open reach in an grab the top ends of the card whose back panel was located previously
Pull out the card
Unpack your replacement soundcard and insert it into the same slot as the previous card
Push down firmly until the soundcard is firmly seated.
Replace the computer cover and plug all connecting cords back in.

Step 4: Install Drivers and Test
Turn the computer on and wait for it to boot up.
Insert the compact disk or floppy disk supplied by the vendor of the soundcard
and follow the instructions on the computer screen.
When the installation of the soundcard driver is complete,
test you soundcard by playing your favorite C D or M P 3 file.

Congratulations your have successfully installed a soundcard








debug data....
dataListIndex

action next previous repeat exit Spoken value is If there is text after this sentence, your Internet Explorer is not configured correctly.